Filter
Top Products
Adjusting the Stitch Length
Pressthe modeselectionkey_ to enter stitch
lengthadjustingmode.
The LED displayshows"2.2" (defaultsetting).
Pressthe Down(-') keyto decrease stitchlength.
Pressthe Up (+) key toincreasestitchlength.
The stitchlengthcan bevariedfrom 0.0 to 5.0.
Reverse stitch length cannot be set longer than 2.5.
1.0
I
I
I
I
I
2.2 5.0
Changing the needle drop position
You canchangethe needledrop positionof straight
stitching,i.e. patterns#01-04 and#18-21
01 02 03 04 18 19 2g 2_
,, I_,_
Press the mode selection key _ toenter stitch
width adjusting mode.
The LED display shows "3.5" (default setting),which
represents the center needle position.
Press the Down (-) key to move the needle to the left.
Press the Up (+) key to move the needle to the right
Left needle position
(_ Center needle position
(_ Right needle position
0.0 3.5
®
7.0
®
3O