Filter
Top Products
5
Bulk Storage Hopper-
Item # 1-00-73450, with 1500 lb
pellet capacity, it will automatically
re-ll the unit hopper when it falls
below a certain level.
Inlet Cover part#
1-10-08542
Flex pipe part#
1-00-08543
(25')
Direct Vent Wall Passthrough
Item # 1-10-677077 provides for safe passing of
the 3” pellet vent pipe through an outside wall,
while providing the attachment for outside air. No
extra holes needed.
Standard method of attaching outside air. Be sure to
use the inlet cover to prevent birds and/or rodents
from entering the intake pipe. This method requires a
hole to the outside, separate from the vent passage.
Item # 2-00-232044B, secures to the boiler
and gives the support needed for the
expansion tank and circulator, while keeping
them at a workable distance from the boiler.
Item # 1-00-232200, provides
automatic ll, and converts the
heating system plumbing from
pressurized to a zero pressure
system. Allows for installation into
more places where codes and
standards restrict pressurized
systems. Circuit Board Dipswitch
#6 must be “ON” when installed.