Filter
Top Products
1 Turn Mode Selector to OFF.
2 Scrape the air holes in the burnpot.**
3 Fill the hopper with pellets.
4 Turn Feed Adjuster to “Test”.*
5 Check the Combustion Blower and Feeder Motor for operation.*
6 Turn Feed Adjuster back to the #4, or previously known setting.
7 Turn the MAX TEMP dial to the desired temperature.
8 Turn MIN TEMP dial to the desired settings.*
9 Flip the igniter switch to Auto.*
The boiler will ignite if the temperature of the boiler water is less than the
temperature set on MAX TEMP dial..
*See the section on Operation for information
about Manual Lighting and Emergency Power.
**See the section on Maintenance for more details
about cleaning.
Quick Reference ( Auto-Light )