Filter
Top Products
Heat & Glo • ST-36TR-IPI, PIER-36TR-IPI • 2176-900 Rev. F • 8/11 67
STEP 4. LOG #3 (SRV2005-702): Position log #3 as shown by leaning it against log # 2 and resting the other end on the
peak of the burner. DO NOT cover any port holes.
STEP 5. LOG #4 (SRV2005-703): Locate the sharp notch on log #4 against the grate tine as shown. The smooth cutout
on the bottom of log #4 should rest on the burner surface. The side of Log #4 must be 3/4 inch from the nearest port hole
on the right side of log #4. DO NOT cover any port holes.
STEP 6. LOG #5 (SRV2005-704): Using the sharp notch on the heavy end of log #5, align it on the grate tine and set it
on the fl at area of log #4 as shown.
3
3
4
4
SHARP
SHARP
NOTCH
NOTCH
SHARP
SHARP
NOTCH
NOTCH
2
2
1
1
3
3
2
2
1
1
1
2
4
4
5
5
3
3
2
2
1
1
GRATE
GRATE
TINE
TINE
3/4 IN.
3/4 IN.