Filter
Top Products
Heat & Glo • ST-36TR-IPI, PIER-36TR-IPI • 2176-900 Rev. F • 8/11 63
E. Elevated Hearth Systems
Use the table below to identify the hearth system that will be used. The table will also help identify effects on the various
dimensions. Some hearth systems will elevate the appliance off the fl oor at a given dimension. For example, if appliance
will be used with a Kenwood Cabinet with Base, the appliance will be elevated 9-1/4 inches. The 9-1/4 inch elevation
will also have to be added to the following: Extension Wall Hole referenced in Figure 8.2 (Exterior Wall Hole) and Rough
Opening Height (header height) referenced in Figure 5.2. Note: Finished fl oor thickness should also be considered when
determining installation dimensions.
MODEL DESCRIPTION PART #
ELEVATED APPLIANCE
DIMENSION
See Note 1
MARBLE LEG CUT
LENGTH
See Note 2
KENWOOD MANTEL AFKDMPB 0 (See Note 3) 27-3/8 in.
KENWOOD MANTEL W/ BASE AFKDMPB W/ HTKDMPB 9-1/4 in. 29-3/8 in.
LAURENT SURROUND LAURENT-36 1-1/2 in. N/A
CAMDEN SURROUND CAM36PG 0 N/A
CAMDEN SURROUND W/HEARTH CAM36PGH 1-3/4 in. N/A
CAMDEN SURROUND W/MANTEL CAMM36PG 0 N/A
CAMDEN SURROUND W/MANTEL &
HEARTH
CAMM36PGH 1-3/4 in. N/A
ESSEX SURROUND ESSEX36PG 0 N/A
ESSEX SURROUND W/HEARTH ESSEX36PGH 1-3/4 in. N/A
ESSEX SURROUND W/MANTEL ESSEXM36PG 0 N/A
ESSEX SURROUND W/MANTEL &
HEARTH
ESSEXM36PGH 1-3/4 in. N/A
MONROE SURROUND MON36PG 0 N/A
MONROE SURROUND W/HEARTH MON36PGH 1-3/4 in. N/A
MONROE SURROUND W/MANTEL MONM36PG 0 N/A
MONROE SURROUND W/MANTEL &
HEARTH
MONM36PGH 1-3/4 in. N/A
Note 1. Add dimensions to Exterior Wall Hole (Figure 8.2) and Rough Opening Height (Figure 5.2).
Note 2. Verify Marble Cut Lengths on site prior to cutting.
Note 3. Dimensions assume use of a 3/4 in. Hearth Pad.