Filter
Top Products
Heat & Glo • ST-36TR-IPI, PIER-36TR-IPI • 2176-900 Rev. F • 8/1166
F. Install the Log Assembly
2005-937F 9/08
Log Set Assembly: LOGS-MSR
Models: PIER-HV, ST-HV, LCOR-HV, RCOR-HV
ST-36TR, PIER-36TR, TWILIGHT-II-B
CAUTION: Logs are fragile! Carefully remove the logs
from the packaging. Remove the cardboard support from
inside of fi replace.
STEP 2. LOG #1 (SRV2005-701): Use the indent on the bottom side of the log to position the large end of the log onto
the grate bar as shown. Slide the log back until the indent engages the grate tine as shown above. Position the thin end of
log #1 one inch from port pattern as shown.
STEP 3. LOG #2 (SRV2005-700): Position log #2 on the left grate bar and the pilot assembly. Use the cut out notches
on the log to position it as shown.
STEP 1. Before positioning the logs, refer to the instal-
lation manual for electric ember set-up and ember place-
ment.
1
1
2
2
PILOT
PILOT
ASSEMBLY
ASSEMBLY
CUTOUT
CUTOUT
GRATE BAR CUTOUT
GRATE BAR CUTOUT
1-inch
1-inch
1
1
1
1
2
2
4
4
5
5
6
6
3
3
PIER-HV, ST-HV, RCOR-HV, ST-36TR, PIER-36TR, TWILIGHT-II-B
(See page 4 for LCOR-HV)
PILOT ASSEMBLY
PILOT ASSEMBLY
INDENT
INDENT
BACK VIEW
BACK VIEW
BOTTOM VIEW
BOTTOM VIEW
GRATE TINE (HIDDEN)
GRATE TINE (HIDDEN)
GRATE
GRATE
BAR
BAR
INDENT
INDENT