Filter
Top Products
If you have a question about any special order item,
just call 1-800-543-GATE!
Accessories are Available From Your Retail Store (con't)
The contents of all material available on this installation manual are copyrighted by GTO, Inc. (“GTO”), unless otherwise indicated. All rights are reserved by GTO, and content may not be
reproduced, downloaded, disseminated, published, or transferred in any form or by any means, except with the prior, written permission of GTO. Any reprinting of GTO publications is by
permission only. Copyright infringement is a violation of federal law.
Mighty Mule¨, E-Z Gate¨, GTO¨, are registered trademarks of GTO, Inc. America’s DIY Automatic Gate Openers is a trademark of GTO, Inc. and are the exclusive property of GTO, Inc.
(“GTO”).
All rights are reserved by GTO, and these marks may not be used, in any for without the prior, written permission of GTO.
Push to Open Bracket (FM148)
Required when Mighty Mule® 350/352 gate operator(s) must push the gate open, such as on a sloping
driveway or where space prevents gate(s) from opening inward (pulled open). Order two PTO brackets for
conversion of a dual swing gate installation.
Column Mount Lock Receiver (433IH)
For mounting the Automatic Gate Lock on brick columns, walls, or for other applications with limited
space between gate and post.
Replacement Transformer (RB570)
Standard 18 volt, 2200 mA, AC transformer for maintaining the battery included with the Mighty Mule®
352 gate operator. This is the only transformer approved for use with all UL325 Mighty Mule® gate
operator systems.
Universal Receiver (RB709U-NB)
The Universal Receiver allows you to use the same Mighty Mule® 352 entry transmitter to operate your
gate operator and your garage door operator. Compatible with most garage door operators.
Automatic Gate Lock Pull-to-Open (FM143)
A MUST for added security. Solenoid driven, with a steel housing. Unlocks and locks automatically
as gates open and close. Used with Mighty Mule® DC swing gate operating systems for maximum
stability and security. Comes with a keyed manual release. Recommended for gates over 8 ft. long.
Ideal for animal enclosures or high wind areas.
Wireless Entry Intercom / Keypad (FM136)
Allows owner to screen guest at the gate before allowing access to the property. Keypad also allows
owner to give up to 25 programmable entry codes to family, friends or approved delivery personnel.
Codes can be permanent of temporary. Can be wireless up to 500 feet or hard wired up to 1000 feet.
Additional base stations available (F3101MBC).
Low Voltage Wire (RB509)
The 16 gauge, multi-stranded, dual conductor Low Voltage Wire is for connecting the AC powered
transformer, or the Solar Panel to the control board. Also used for the connection of accessories,
such as locks, keypads, push buttons and other wired control devices. This specially designed wire
is UV treated, PVC coated and ready for direct burial. Available in 1000' rolls or special lengths.
Driveway Alarm (FM131)
Keep track of the comings and goings on your property with this electromagnetic sensor alert
system. When a vehicle passes the sensor, the receiver emits an audible tone and lets you know
someone’s there. Functional range of up to 400 ft. Easy-to-install and stake is included in kit.
Transmitter requires 2 “C” batteries (not included)
Wireless Driveway Vehicle Sensor (FM130)
The wireless gate opening sensor offers hands free operation of the Mighty Mule Gate Opener. Works
wirelessly up to 100 feet from the gate. Transmitter, receiver and two AA batteries are included.
AUTOMATI C
GATE LOCK