Filter
Top Products
Mighty Mule 352
43
Accessories are Available From Your Retail Store
®
E-Z GATE OPENERS
ACCESSORIES
Solar Panel (FM123) 10 watt (FM121) 5 watt -requirestwo-5wattpanels
The Solar Panel is a 10 watt solar powered battery charger for use with the FM350 & FM352 gate
operator systems. Particularly suited for remote installations, each Solar Panel comes with tubular
steel support, mounting clips, wire connectors, and 8 ft. of low voltage wire (see Low Voltage Wire
for additional wire). The Mighty Mule® 352 control board has clearly labeled terminal connections
for easy installation of the Solar Panel. Installation in some regions of the world will require multiple
solar panels for adequate charging power. Dual gates require a minimum of 10 watts of solar
charging power. (5 watt panels require 2 panels)
Push Button Control (FM132)
Unlit doorbell button for remote entry or exit control. Wires directly to the control board and uses 16
gauge multi-stranded, dual conductor low voltage wire (sold separately).
Pin Lock (FM133)
The Pin Lock substitutes for the clevis pin at the front end of the Mighty Mule® 352 gate openers.
Helps prevent theft of the operator from the gate, while allowing quick release of the operator.
Key Chain Two Button Transmitter (FM134)
The Key Chain Transmitter is a dual button version of the Mighty Mule® single button entry
transmitter and has the same adjustable code settings. Used for 2 gates or 1 gate and garage door.
(battery is included)
Single Button Transmitter (FM135)
The Mighty Mule® entry transmitter, with adjustable code settings, is standard equipment with all
Mighty Mule® 352 systems. (battery is included)
Digital Keypad (FM137)
The specially designed digital keypad can be easily installed as a wireless or wired keypad. It can
be programmed to use up to 25 different personal identification number (PIN) codes. Each code is
face programmable with additional security features built in. Wired installations require 16 gauge,
low voltage, multi-stranded, dual conductor, direct burial wire (sold separately). Requires 3 AA
batteries (not included).
Mounting Post (FM100) - In Ground
This black powder coated pedestal is designed to provide convenient access to your keypad,
wireless intercom, or other access control device from your vehicle. With its break down design it
is easy to install and works well in most standard applications. Surface Mount Flanges (F102) and
Extensions (F103) for added height are available.
Mighty Mule® Vehicle Sensor (FM138)
The Gate Opening Sensor is designed for residential and agricultural applications and is compatible
with most Mighty Mule® automatic gate opener models (see Sensor Box for model compatibility).
The Sensor is an electromagnetic sensor, which offers 'hands free' operation of the Mighty Mule®
Gate Operator with a 12 ft. radius of detection of vehicles in motion.
A wireless version of the Gate Opening Sensor is available. (FM130)
1
2
3
4
5
6
7
8
9
0