Stovax Studio 22 Indoor Fireplace User Manual


  Open as PDF
of 39
 
15
INSTALLATION INSTRUCTIONS
SITE REQUIREMENTS
5. APPLIANCE LOCATION
5.1 Please note this appliance has been specifically designed for
studwork applications although installation into other
constructions, including masonry, is entirely feasible. There
are two methods of installation, see Installation
Instructions 3.2 Frame, 3.3 Edge
5.2 Thisappliancemuststandonanon-combustiblehearth/
platform that is at least 12mm thick.
NOTE: It is recommended you construct the back panel
of the fireplace from natural materials cut into three or
more sections to prevent cracking. Resin-based materials
may not be suitable. This appliance is an effective heat
producer and attention must be paid to the construction
and finish of the fireplace.
5.3 A combustible shelf must be:
• maximum150mmindepth
• minimum,400mmhighabovethefire
A combustible side wall must be a minimum of 150mm
from the appliance.
5
AR2077
 previous next