Filter
Top Products
34
1. Carefully remove logs from
box. Check to ensure there is
no damage. It is very important
to install all logs in their proper
position to insure safe, optimum
operating conditions.
2. Place the log set into the
rebox. Locate each log by
seating it down onto the burner
tray support pins. Follow Figures
48 to 54 proper log placement.
3. A bag of ceramic ber
embers and rock wool embers
is provided gently remove the
ember material from the plastic
bag. Spread a layer loosely in
a random manner across the
burner tray. Do not allow any
embers to rest against pilot
assembly. (See diagram provided
for proper ember placement.)
DO NOT pack this ember
material as this could create an
unsafe condition, leave embers
loose.
4. Upon the rst light up, watch
for ignition to ALL burner ports.
If a long delay is noted: First,
wait for the appliance to cool
down.
• Open the front door of the
appliance.
• Check to carefully reposition
the embers making sure that
burner ports are not plugged
solid or blocked.
Placement for
Front Left Log
Ledge for
Center Log
Placement Pin
for Center Log
Figure 50: Step 3 of Log Placement.
Figure 51: Step 4 of Log Placement.
Figure 52: Complete Log Placement.
Secondary Installation