Filter
Top Products
Secondary Installation
CAUTION: NEVER OPERATE THIS APPLIANCE WITH THE GLASS DOOR REMOVED.
Important note: When the unit is turned
on for the rst time, It should be turned onto
high without the fan on for the rst four (4)
hours. This will cure the paint, logs, gasket
material and the other products used in the
manufacturing process. It is advisable to
open a window or door, as the unit will start
to smoke and can irritate some people. After
the unit has gone through the rst burn turn
the unit off including the pilot, let the unit get
cold then remove the glass door and clean
it with a good gas replace glass cleaner,
available at your local ENVIRO dealer.
See MAINTENANCE AND SERVICE on how to remove
door to clean glass.
Figure 54: Log Placement with Rock Wool & Embers.
Figure 55: Appliance Burning.
35
Figure 53: Log Placement with Rock Wool.