Filter
Top Products
Microprocessor Control
Liebert
®
Mini-Mate2
™
40
6.2 Main Menu <Menu>
Press the MENU key to display the Main Menu. The menu selections (in the following order) include:
• SETPOINTS
• STATUS
• ACTIVE ALARMS
•TIME
•DATE
• SETBACK
• SETUP OPERATION
• SET PASSWORD
• SETUP PASSWORD
• CALIBRATE SENSOR
• ALARM ENABLE
• ALARM TIME DELAY
• COM ALARM ENABLE
• CUSTOM ALARMS
• CUSTOM TEXT
•DIAGNOSTICS
• END OF MENU
Use the UP and DOWN arrows to scroll through the selections; when ready to select a particular
function press Enter.
6.3 Setpoints
Setpoints and system setup parameters are kept in nonvolatile memory. Selecting SETPOINTS from
the Main Menu will display the following selections:
• TEMPERATURE SETPOINT
• TEMPERATURE SENSITIVITY
• HUMIDITY SETPOINT
• HUMIDITY SENSITIVITY
• HIGH TEMPERATURE ALARM
• LOW TEMPERATURE ALARM
• HIGH HUMIDITY ALARM
• LOW HUMIDITY ALARM
Scroll through this sub-menu by using the Up and Down arrows, then press Enter to select a
particular function. To change a particular value, press Enter and use the Up and Down arrows to
change the value. When the value has been changed press Enter to store the value. For example to
change the temperature setpoint from the main status display.
1. Press Menu key to display main menu.
2. Scroll to “SETPOINTS” using the Up and Down arrows. Press Enter.
3. Scroll to “TEMP SETPOINT” using the Up and Down arrows. Press Enter.
4. Use the Up and Down arrows to change the value. Press Enter.