Filter
Top Products
11
6) The boiler should be located as close to the chimney as possible.
7) Do not install this boiler directly on a surface that may get wet. Raise the boiler on a pad.
Clearances Required For Removal Of Tankless Heater
T-1 T-2 T-3
Left Side 24" 18" (Controls) 27" 32" 42"
Right Side 24" 18" (Controls) 27" 32" 42"
Front 24" 36" (Cleaning-Burner Removal) -------- -------- --------
Rear 24" 36" (Cleaning) -------- -------- --------
Top 24" --------------------- -------- -------- --------
Minimum Clearance - Jacket
To Combustible Or Non-
Combustible Construction
Service Clearance To Non-
Combustible Construction
Table 3: Minimum Clearances to Combustibles
9