Filter
Top Products
4
Dutchwest Direct Vent / Natural Vent Gas Heater
30001935
Dutchwest Direct Vent / Natural Vent Dimensions
C
L
Valve Inlet
23"
(584mm)
6"
(172mm)
24"
(622mm)
C
L
Valve
Inlet
1935
Dutchwest
DV/NV
dimensions
5/15/03
28"
(721mm)
12"
(318mm)
17"
(419mm)
4"
(111mm)
Refer to Page 6 for Flue Collar
Centerline Dimensions
Fig. 1 Dutchwest dimensions.
Attention
The Dutchwest stove is shipped from the factory as a Direct Vent Gas Heater. This heater may be convert-
ed into a Natural Vent unit in the field. If a Natural Vent heater is desired, the Z31D00 FSDHAG Draft Hood
must be directly installed to the top of the unit according to the installation instructions. The Draft Hood
Adapter is available in the 7FSDHASK stove kit or as a separate item.
When the Dutchwest stove is converted to Natural Vent, it uses 4” vent pipe. For aesthetic purposes the
CFM direct vent system may be used up to the ceiling.