Filter
Top Products
Page 13.6
Adjusting the Minutes of Run-Time
Before the Next Stage
Adjusting the Minutes of Run-Time
Before the Next Stage
(0 - 60 min.)
Adjust the amount of
time stage 2 must be
on before stage 3 turns
on.
0:02
3
Setup
28
(0 - 60 min.)
Adjust the amount of
time stage 1 must be
on before stage 2 turns
on.
0:02
2
Setup
27
For more detailed information, please see the explanation on page 13.4.
Press the PROGRAM button to leave the Setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds.
PROGRAM
Press
MODE
Press
PROGRAM
MODE
MODE
Press the MODE button. While holding
the MODE, press the PROGRAM
button to enter Setup screens.
Press the MODE button repeatedly
until this setup screen appears.
Note: Press the MODE
button momentarily
to move through the
setup screens. Press
and hold the MODE
button to move back-
wards through the
setup screens.
13
Carrier