Filter
Top Products
60
START-UP CHECKLIST
(Remove and Store in Job File)
I. PRELIMINARY INFORMATION
MODEL NO.: SERIAL NO.:
DATE: TECHNICIAN:
II. PRE-START-UP (insert checkmark in box as each item is completed)
j VERIFY THAT JOBSITE VOLT AGE AGREES WITH VOL T AGE LISTED ON RATING PLATE
j VERIFY THAT ALL PACKAGING MATERIALS HAVE BEEN REMOVED FROM UNIT
j REMOVE ALL SHIPPING HOLDDOWN BOL TS AND BRACKETS PER INST ALLATION INSTRUCTIONS
j VERIFY THAT CONDENSATE CONNECTION IS INST ALLED PER INS TALLATION INSTR UCTIO NS
j C HEC K ALL ELECTRICA L C ONNECTIONS AND TERMINALS FOR TIGHTNESS
j CHECK GAS PIPING FOR LEAKS
j CHECK THAT RETURN (INDOOR) AIR FIL TERS ARE CLEAN AND IN PLACE
j V ERI FY THAT U NIT INS TALLATION IS LEVEL
j C HEC K FAN WHEELS AND PR OP ELLER FOR LOC ATION IN HOUSING/ORIFICE AND SETSCREW
TIGHTNESS
j C HEC K TO ENS UR E T HAT ELECTRICA L WI RIN G IS NO T I N CON TACT WITH REFR IGERA NT LINES
OR SHARP MET AL EDGES
j CHECK PULLEY A LIGN MENT AN D BELT TENS ION P ER INSTALLATION IN STRU CTION S
III. START-UP
ELECTRICAL
SUPPL Y VOLT AGE L1-L2 L2-L3
L3-L1
COMPRESS OR A MPS L1 L2 L3
INDOOR-F AN AMPS L1 L2 L3
TEMPERATURES
OUTDOOR-AIR TEMPERATURE
DB
RETUR N-A IR TEMP ERATURE
DB WB
COOLING SUPPL Y AIR
DB
HEATINGSUPPLYAIR DB
PRESSURES (Cooling Mode)
GAS INLET PRESSURE
IN.WG
GAS MANIFOLD PRESSURE
IN.WG (HIGH FIRE)
REFRIGERANT SUCTION PSIG
REFRIGERANT DISCHARGE
PSIG
j VERIFY THAT 3-PHASE F AN MOTOR AND BLOWER ARE ROT ATING IN CORRECT DIRECTION. IF THEY
ARE NOT ROT ATING IN CORRECT DIRECTION, LOCKING COLLAR M UST BE RE--TIGHTENED AFTER
CORRECTING DIRECTION O F ROT ATION
j V ERIFY THAT 3-P HASE SCROLL CO MPRESSOR IS ROT ATING IN TH E CORRECT DIRECTION
j VERIFY REFRIGERANT CHARGE USING CHARGING CHARTS
Manufacturer reservesther ighttodiscontinue,or changeat anytime,specifications or designs withoutnotice andwithoutincurringobligations.
E2007BryantHeating&Cooli ngSystems 7310W.MorrisSt. Indianapolis,IN 46231 Printedin U.S.
A
. EditionDate:2
/
07
Replaces:II581B---36---7
Catalog No. II581B---C---36---1
581B,C