Brother XL5020 Sewing Machine User Manual


 
37
CONTENTS
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
MAINTENANCE
INDEX
Changing Sewing Directions (fig. A)
1. Stop the machine at the point where you wish to change directions
with the needle still in the fabric.
2. Raise the presser foot and turn the fabric to line up its new direc-
tion using the needle as a turning point.
3. Lower the presser foot and start sewing in the new direction.
Finishing Sewing (fig. B)
1. Stitch to the end of the seam and stop.
2. Press down the reverse sewing lever, then lightly step on the foot
controller to stitch backward over the stitch for 1 cm (3/8") from its
end.
A
B
Cambio de sentido de costura (fig. A)
1. Pare la máquina en donde quiera cambiar de dirección, con la
aguja picada en el tejido.
2. Levante el prensatelas y gire el tejido en la dirección que debe
seguir, usando la aguja como placa giratoria.
3. Baje el prensatelas y empiece a coser en la nueva dirección.
Para terminar las costuras (fig. B)
1. Cosa hasta el final de la costura y pare.
2. Apriete la palanca de retroceso y presione suavemente el pedal
para coser hacia atrás hasta 1 cm (3/8") de la orilla del tejido.
Cambio di direzione (fig. A)
1. Arrestare la macchina nel punto in cui si desidera cambiare la direzione
della cucitura lasciando l’ago nel tessuto.
2. Sollevare il piedino premistoffa e ruotare il tessuto intorno all’ago nella
direzione voluta.
3. Abbassare il piedino premistoffa e riprendere a cucire nella nuova dire-
zione.
Fine della cucitura (fig. B)
1. Cucire fino al margine del tessuto e arrestare la macchina.
2. Spingere la leva di cucitura di ritorno e premere leggermente sul reostato
per cucire a marcia indietro per 1 cm dal margine del tessuto.