Filter
Top Products
5
CONTENTS BEFORE USE
SEWING
UTILITY STITCHES MAINTENANCE
SEWING CHART
PATTERNS
(PROGRAMMED IN
MACHINE)
III
III
A. MAIN POWER SWITCH AND
CONNECTORS
1 Main power switch
Use to turn on/off the main power.
2 Foot controller jack
Use to connect the foot controller.
3 Power cord
Use to connect the machine to the power supply.
CAUTION
– When leaving the machine unattended, the
main switch of the machine should be
switched off or the plug must be removed
from the socket-outlet.
– When servicing the machine, or when remov-
ing covers or changing bulbs, the machine
or the electrical set must be unplugged.
– For U.S.A. only
This appliance has a polarized plug (one
blade wider than the other). To reduce the
risk of electrical shock, this plug is intended
to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, re-
verse the plug. If it still does not fit, contact a
qualified electrician to install the proper out-
let. Do not modify the plug in any way.
B. FLATBED ATTACHMENT WITH
ACCESSORY COMPARTMENT
I Tilt the lid of the accessory compartment toward
you to open it.
II Each presser foot can be identified by the sym-
bol on it.
1 Presser foot symbol
III COMPARTMENT ACCESSORY LIST
The location of each accessory is shown in fig-
ure III.
1 Buttonhole foot “A” X57789-101
2 Overcasting foot “G” X51162-001
3 Monogramming foot “N” 137988-101
4 Zipper foot “I” X59370-051
5 Space for Zigzag foot “J” * 137748-101
6 Blind stitch foot “R” X56409-001
7 Seam ripper X54243-001
8 Bobbins SA155 XA3812-051
9 Needle set X58358-001
No. Part Name
Part Code
U.S.A. Others
*
The machine comes with zigzag foot “J” attached.
* The spaces marked with “★” are empty. No en-
closed accessories fit in these spaces.
*
Always use the plastic bobbin which is supplied
with the machine or in the accessory compartment.
* Always use accessories recommended for this
machine.
2
1
3
1
J
5
1
2
4
3
6
★
★
★
9
8
7