Filter
Top Products
12
CONTENTS BEFORE USE
SEWING
UTILITY STITCHES MAINTENANCE
SEWING CHART
PATTERNS
(PROGRAMMED IN
MACHINE)
1
2
Setting the bobbin
1. Slide open the bobbin cover.
1 Bobbin cover
2 Bobbin cover release button
2. Insert the bobbin into the shuttle with the thread direction as
shown in the diagram.
3. Guide the thread end through the slit, then pull the thread to-
ward you to cut off any excess thread.
1 Built-in thread cutter
4. Close the bobbin cover by placing the left end in place and
pressing down lightly on the right end so that it snaps into
place.
* You can begin sewing immediately without drawing up the bob-
bin thread.
1
2
1
CAUTION
Setting the bobbin improperly may cause the thread tension to
loosen, breaking the needle and resulting in injury.
1 Wound evenly
2 Wound poorly
12
CAUTION
Be sure the bobbin is set so the thread unrolls in the
correct direction. If the thread unrolls in the wrong
direction, it may cause the thread tension to be
incorrect or the needle to break.