Brother PC-2800 Sewing Machine User Manual


 
64
CONTENTS BEFORE USE
SEWING
UTILITY STITCHES MAINTENANCE
SEWING CHART
PATTERNS
(PROGRAMMED IN
MACHINE)
TWIN NEEDLE
Decorative stitches where the zigzag width can be changed
manually..
2. Do the upper threading. Follow the steps for threading a sin-
gle needle for the first threading (see page 13 “Upper Thread-
ing”).
1. Turn the main power switch to OFF, and install the twin needle
(see page 25 “Changing the Needle”).
1 Stopper
3. Pass the thread through the needle clamp thread guide on the
needle bar, then thread the needle on the left side.
Caution
The needle threader lever can not be used. Thread the twin
needle by hand, from front to back. Using the needle
threader lever may result in damage to the machine.
1
6
5
2
3
19
J
CAUTION
Use only twin needles made for this machine (part code X59296-001). Other needles could
break, resulting in damage.
Do not sew with bent needles. The needle could break and cause injury.
When using the twin needle, use the presser foot “J” regardless of what kind of sewing
will be carried out.