Filter
Top Products
47
CONTENTS
BEFORE USE
SEWING
UTILITY STITCHES MAINTENANCE
SEWING CHART
PATTERNS
(PROGRAMMED IN
MACHINE)
EYELET STITCH
For sewing eyelets on belts, etc.
Size of eyelet (actual size)
20
1
2
3
ABC
A– Large: 7.0 mm (9/32")
B– Medium: 6.0 mm (1/4")
C– Small: 5.0 mm (13/64")
4. Use the eyelet punch to make a hole in the center of the stitch-
ing.
1. Press the stitch width manual change key to turn on the LED
lamp.
2. Use the stitch width adjustment lever to select the eyelet size.
1 Large
2 Medium
3 Small
* When the stitch width is at the default setting (the stitch width
manual change key’s LED lamp is blinking) the large eyelet
will be sewn.
* Stitch length can not be adjusted.
3. Attach monogramming foot “N”, then turn the balance wheel
to check the needle drop position. Lower the presser foot le-
ver and start sewing. When sewing is finished, the machine
sews reinforcement stitches and stops automatically.
1 Needle drop position
N