Filter
Top Products
20
CONTENTS BEFORE USE
SEWING
UTILITY STITCHES MAINTENANCE
SEWING CHART
PATTERNS
(PROGRAMMED IN
MACHINE)
6
5
4
3
2
6
5
4
3
2
3
4
1
2
THREAD TENSION
Correct upper thread tension
The thread tension is normally set on “4” for gen-
eral sewing applications. (Refer to the FABRIC/
THREAD/NEEDLE COMBINATION CHART on
page 26.)
However, the thread tension dial can be used to
adjust the tension of the upper thread in the follow-
ing cases.
* when using specialty threads or sewing on spe-
cial fabric
* when sewing gathers, shirring or shell tucks
* when these settings do not give the desired re-
sult
The upper thread and the bobbin thread should
cross at about the center of the fabric. If the thread
tension is incorrectly set, flat attractive seams will
not be sewn or the fabric will pucker.
1 Wrong side
2 Right side
3 Upper thread
4 Bobbin thread
Loosening the upper thread tension
Turn the thread tension dial to the left to loosen the
upper thread tension.
1 Bobbin thread
2 Upper thread
3 Right side
4 If the upper thread tension is too strong,
locks appear on the right side of the fabric.
1
4
2
3