Filter
Top Products
27
1. SEWING CHAPTER 2
TRIAL SEWING
Sewing using a utility stitch
1. Turn on the sewing machine. The straight stitch (left) is se-
lected.
2. Install the correct presser foot. Place the fabric under the
presser foot, then pull out about 5 cm (2") of the upper thread
and pass it under the presser foot toward the rear of the ma-
chine.
1 Upper thread
2 5 cm (2")
CAUTION
Always use the correct presser foot. If the wrong
presser foot is used, the needle may strike the
presser foot and bend or break, resulting in injury.
1
2
1
3
4
5
2
CAUTION
• To avoid injury, pay special attention to the needle while the machine is in operation.
Keep your hands away from moving parts while the machine is in operation.
• Do not stretch or pull the fabric during sewing. Doing so may lead to injury.
• Do not use bent or broken needles. Doing so may lead to injury.
• Take care that the needle does not strike basting pins or other objects during sewing.
Otherwise, the needle may break and cause injury.
• If stitches become bunched, lengthen the stitch length setting before continuing sewing.
Otherwise, the needle may break and cause injury.
CONTENTS BEFORE USE
SEWING
UTILITY STITCHES MAINTENANCE
SEWING CHART
PATTERNS
(PROGRAMMED IN
MACHINE)