Filter
Top Products
Selecting Stitching 73
3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
f
Select the stitch type.
X The screen containing the various types of
stitches appears.
• To select a different stitch type, press
(Back key).
g
Press the stitch selection.
(Previous page key) displays the previous
screen, and (Next page key) displays the
next screen.
When a decorative stitch is selected
a Automatic reverse/reinforcement stitch
b Decorative stitch selection
c Set width and length
d Automatic thread cutting
e Check combined pattern
f Delete a selected pattern
g Horizontal mirror image
h Single stitch sewing
i Repeat sewing
• To select a different stitch, press the to
remove a selected pattern.
h
If necessary, specify the setting for automatic
reverse/reinforcement stitching and adjust the
stitch length, etc.
• For details on sewing with each of the utility
stitches, refer to the following pages.
Note
z When a stitch is selected, the icon for the
presser foot that should be used appears in
the screen. Check that the correct presser
foot is attached before starting to sew. If the
wrong presser foot is installed, turn off the
sewing machine, attach the correct presser
foot, and then select the desired stitch again.
Memo
z For details on adjusting the stitch width and
length, refer to "Adjusting the Stitch Width
and Length" (page 56).
3
5
6
4
12
7
89
SE-BrotherE_sgml.book Page 73 Monday, June 30, 2003 3:44 PM