Filter
Top Products
Attaching the embroidery foot 131
4
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Attaching the embroidery foot
Attachment of the embroidery foot is explained here.
Attaching the embroidery foot
Attach the embroidery foot when embroidering.
Have the included embroidery foot "Q" and a
screwdriver ready.
a Embroidery foot bar
b Caught by the presser foot holder
CAUTION
a
Press (Needle position button) once or
twice to raise the needle.
a The needle goes up.
b
Turn off the sewing machine.
CAUTION
c
Raise the presser foot lever.
X The presser foot is raised.
• At the time of purchase, the presser foot lever
is up.
d
Press and hold the black button on the back of
the presser foot holder to release it.
a Black button
b Presser foot holder
X Detach the presser foot from the presser foot
holder.
● Always use the embroidery foot "Q" when
embroidering. If the wrong presser foot is
used, the needle may hit the presser foot
and break or bend.
2
1
1
● Before replacing the presser foot, be sure
to turn off the sewing machine, otherwise
injuries may occur if the start/stop button
is accidentary pressed and the machine
starts sewing.
1
1
2
SE-BrotherE_sgml.book Page 131 Monday, June 30, 2003 3:44 PM