Filter
Top Products
Cover A
Included Accessories
After opening the box, check that the following accessories are included. If any item is missing or dam-
aged, contact your retailer.
Accessories
Note
(For U.S.A. only)
z Foot controller: Model N5V
This foot controller can be used on this machine model 500D/500, HE-120.
z The screw of the presser foot holder is available through your authorized dealer.
(Part code: XA4813-051)
1. 2. 3. 4.
5.
6. 7.
8.
9.
10.* 11. 12. 13. 14. 15. 16. 17. 18. 19.
20.
21. 22. 23. 24. 25.
26. 27.
28.
29. 30. 31.
*75/11 2 needles
90/14 2 needles
90/14 2 needles: Ball point needle (gold colored)
No. Part Name
Part Code
No. Part Name
Part Code
U.S.A. Others U.S.A. Others
1 Buttonhole foot "A" XC2691-051 19 Foot controller XC1154-021
2 Overcasting foot "G" XC3098-051
20
Thread cassette set
(1 set: on machine
1set: in carton)
SA250 TC1:XC4716-0233 Monogramming foot "N" X53840-351
4 Zipper foot "I" X59370-051
5 Zigzag foot "J" (on machine) XC3021-051 21 Needle-changing tool XC4551-020
6 Blind stitch foot "R" XC4051-051 22 Operation manual XC6369-121
7 Button fitting foot "M" X59375-151 23 Quick reference guide XC6375-021
8 Seam ripper X54243-001 24 Spool cap (special) XA5752-021
9 Bobbin (4) SA156 SFB:XA5539-151 25 Embroidery foot "Q" XC3829-021
10 Needle set X58358-051 26
Embroidery set (medium)
H 10 cm X W 10 cm
(H 4 inch X W 4 inch)
SA432 EF62:XA6628-002
11 Twin needle X59296-151 27
Embroidery bobbin thread
(white)
SA-
EBT
EBT-CE:XC8375-001
12 Cleaning brush X59476-051 28 Grid sheet set SA527 GS4:XC4549-051
13 Eyelet punch 135793-051 29 Scissors XC1807-121
14 Screwdriver XC4237-021
30 Soft cover
500D XC4530-023
15 Spool cap (large) 130012-054 500 XC3839-023
16 Spool cap (small) 130013-154
31 Accessory case
500D XC5370-023
17 Extra spool pin XC3834-021 500 XC5370-024
18 Spool net XA5523-050