Filter
Top Products
Sewing the Various Built-In Decorative Patterns 117
3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Changing satin stitch length
The length for one satin stitch can be changed in five
gradations.
a
Press (Menu key) on the display panel,
and select the satin stitch group ( ).
b
Select a satin stitch pattern.
c
Press .
X It turns to .
Each time you press it the number changes.
You can select from - .
Realigning the pattern
The pattern may not be sewn correctly, depending on
the type of fabric being sewn or the sewing speed. If
this occurs, adjust the pattern while sewing on a
piece of scrap fabric that is the same as that used for
your project.
a
Attach monogramming foot "N".
• For details, refer to "Replacing the presser
foot" (page 40).
b
Press (Menu key) on the display panel,
and select the decorative stitch group ( ).
X The screen containing the various types of
stitches appears.
c
Select .
X The pattern alignment stitch is selected.
d
Start sewing.
X The pattern for making the adjustment is
sewn.
X The sewing machine stops after it has
finished sewing the pattern.
SE-BrotherE_sgml.book Page 117 Monday, June 30, 2003 3:44 PM