Filter
Top Products
Selecting embroidery patterns 145
4
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
LCD (liquid crystal display)
operation
The LCD (liquid crystal display) is operated using the
operation keys on the display panel. The use of the
keys for embroidery will be explained here.
■ Operation keys
■ LCD button
• When the density of the pattern cannot be
changed, is not displayed.
Returns to the previous screen.
When there are patterns that are not
displayed on the screen (when < or >
is displayed), the previous patterns/
subsequent patterns are displayed.
Returns to the group selection screen.
The selected pattern is cancelled.
Under embroidery, information to be
displayed on the LCD can be selected
from thread color/thread number/
needle count/time to embroider
(after is pressed).
NAME OF COLOR: Typical color name
EMBROIDERY: Embroidery thread
color number
COUNTRY: Country thread color
number
When one of above two settings is selected,
number of the next thread will be also
displayed when embroidering.
(example; 001 —> 800)
NEEDLE COUNT: Needle progress
number
When a specific pattern is selected,
touch this key and then, press
to switch the display. The
sewing settings such as the specified
character string and color are
confirmed.
When an embroidery pattern has
been selected, the time to completion
of the embroidery and the elapsed
time can be checked.
The characters and frame pattern
density can be changed.
There are , (for character
patterns), , and keys.
SE-BrotherE_sgml.book Page 145 Monday, June 30, 2003 3:44 PM