Filter
Top Products
86
BAS-311E.311EL.326E.326EL
Chapter 6 Power supply and electrical parts adjustment
6. Changing special functions using the memory switches
The functions of the switches on the operation panel can be changed to carry out special functions.
Note:The following are special uses. All the memory switches are set to OFF before shipment from the factory.
1. Turn on the power switch.
2. While pressing the TEST switch q, press the STEP BACK switch w to switch to setting mode.
3. Press the program select switch r so that the number displayed on the display screen e matches the switch number
(00 - 3F) for the function that you would like to select from the table.
4. Press the STEP BACK switch w to switch the setting appearing in the display screen t from OFF to ON.
If pressed once more:
■ If the B.T. CHANGE switch y is pressed at this time, all memory switch settings will be changed to OFF.
5. Press the TEST switch q. The display will return to normal.
PROGRAM NO.PROGRAM NO.
MENUMENU
B.T. COUNTER
SPLIT N .
X
-
SCALE
Y
-
SCALE
SPEED
R / W
BAS-300E series
POWER
TESTTEST
STEP BACKSTEP BACK
B
.
T. SET. SET
B.B.T. CHANGE. CHANGE
r
e
t
q
y
w