Filter
Top Products
123
BAS-311E.311EL.326E.326EL
Chapter 10. Option parts
Chapter 10. Option parts
■ Programmer assy
■ Inner clamp device
■ One-touch clamping
device
■ Milling device
■ WP stitch device
■ Auto bobbin changer
■ Snap fastener and hook
attachment device
■ Needle thread presser
device
■ Thread breakage detec-
tor device
■ Needle coder device
■ OT Presser
■ Soft presser
■ Cassette presser
■ Play prevention work
clamp
■ Thread wiper the side
■ Air wiper device
■ 2-step thread tension
device
Used to create sewing patterns for the BAS-300E series.
It can also be used to display error messages.
Used for efficient sewing around labels, emblems and tape; operates by air together with
the outer presser, so material slippages wil not occur.
Allows the clamp to be replaced quickly and easily, without the need for extra tools. The
positioning adjustment that has been previously required for other clamps is no longer
necessary.
This device can be used to cut a variety of objects such as grooves, holes, and outline
shapes in plastic or aluminum sheets.
Increases the stitch creation range for perfect stitches.
When the amount of bobbin thread remaining becomes low, this device automatically re-
places the bobbin. This reduces the need for tasks such as checking the amount of bobbin
thread remaining and replacing bobbins, so that productivity can be increased.
This attachment is for holding snap fasteners and hooks.
This allows the upper thread to be securely placed under the material for the first stitch at
the sewing start.
Available as rotary type or fiber type, stops sewing when a thread breakage is detected and
warms the operator.
This is a pneumatic-type needle cooler which prevents the thread breaking due to heat. It is
particularly useful when sewing thicker materials at high sewing speeds.
Use according to particular sewing needs in order to provide an even clamping force.
At the first stage, the work clamp applies only a spring force so that the material can be
positioned. Then at the second stage, air pressure provides a full clamping force.
This allows the operator to hold two clamps so that the preparation for the next operation
can be carried out while sewing is in progress.
Overlapping operations are thus possible, which can greatly boost productivity.
This work clamp prevents any play from occurring in the clamp.
Wipes the upper thread away to the side when an inner clamping device is being used.
The thread wiper is driven by a pneumatic cylinder.
Allows the upper thread tension to be switched between two settings at any position de-
sired by using the programmer.
* Refer to the separate Parts Book for details.