Filter
Top Products
80
BAS-311E.311EL.326E.326EL
Chapter 6 Power supply and electrical parts adjustment
• The machine motor does not run.
• Motor operation is unstable.
• Needle up stop position is not correct.
• Error [E.20] appears.
• Error [E.22] appears.
4. Programmer operation
• Keys on the programmer respond, but nothing appears on the
display. (P1-LCD)
• Display of the programmer is not lit. (Inverter for P3-LCD)
• The programmer does not operate.
• No switches on operation panel operate.
• Error [E.F1] appears.
• Indication is strange.
• Any switch does not have any effect.
• The power lamp is not lit.
• The DC fan motor does not run.
• Error [E.c5] appears. (P10 FAN-R)
• Error [E.c1] appears. (P10 FAN-L)
5. Others
Main PCB
Main PCB
Main PDB
Power supply circuit board
Machine motor
Programmer circuit board
Programmer circuit board
LCD inverter
Main PCB
DC fan
DC fan
Ponel circuit board
Ponel circuit board