Filter
Top Products
57
BAS-311E.311EL.326E.326EL
Chapter 4. Adjustments
5. When installing the feed plate y, use a 2 mm- diameter
pin !3 (such as a needle) to align the hole in the needle
plate w with the hole in the feed plate w when the ma-
chine is at the home position, and then tighten the bolts
t.
* How to determine the mechanical home position
a. Connect the programmer to the operation panel.
b. Plug the cord into the wall socket, and turn on the
power.
c. Press the P key on the programmer to determine the
mechanical home position.
311E, 311EL
326E, 326EL
y
!3
w
t
y
w
t
!3