Filter
Top Products
33
BAS-311E.311EL.326E.326EL
Chapter 3. Assembly
Feed mechanism (X axis) 311EL, 326E
1. Place X-timing belt B326 w between the two timing belt spacers e on the back of the X-feed bracket q. Align a
rectangular slot of the belt holder r with a tooth of X-timing belt B326 w, and secure them using the bolt t.
2. Fit timing X-timing belt B326 w in X-pulley bracket R y, pass X-pulley shaft R u through the micro bearing i, timing
pulley B o, and the micro bearing i, and attach the retaining ring !0.
3. Place X-timing belt B326 w and X-timing belt A326 !2 on X-pulley bracket L !1, pass the X-timing pulley shaft !3
through the micro bearing !4, timing pulley A !5, X-timing pulley B326 !6, and the micro bearing !4, and attach the
retaining ring !7.
!6
!4
!7
w
u
q
e
t
r
o
!1
!2
i
!0
!3
!4
!5
y
i