Filter
Top Products
Correctly Using the Embroidery Frames 89
3
——
—————————————————————————————————————————————————————————————
—
—————————————————————
Note
● The embroidery frame indicators show all embroidery frame sizes in which the embroidery pattern
can be sewn. Be sure to use an embroidery frame of the most suitable size. If the embroidery frame
that is too large is used, the pattern may be misaligned or the fabric may pucker.
Quilt frame (optional) 200 mm (H) × 200 mm (W)
(7-7/8 inches (H) × 7-7/8 inches (W))
Visit your
nearest
authorized
dealer.
Embroidery
frame holder B
Use when embroidering pieces for quilts.
Border frame (optional) 100 mm (H) × 300 mm (W)
(4 inches (H) × 11-3/4 inches (W))
Use when embroidering a long string of characters or
patterns.
Round frame (optional)
∅=diameter
∅100 mm (4 inches)
∅130 mm (5 inches)
∅160 mm (6 inches)
Visit your
nearest
authorized
dealer.
Use when adding a built-in embroidery pattern to a sleeve.
Select the frame appropriate for the size of the pattern.
Embroidery
frame holder C
(optional)
Cap frame (optional)
<Advanced type 2> 60 mm (H) × 130 mm (W)
(2-3/8 inches (H) × 5-1/8 inches (W))
(For details on
attaching this
frame, refer to
“Using the
Optional Cap
Frame” on
page 225.)
Use when embroidering caps.
Baseball (golf) caps, tulip hats and bucket hats can be
embroidered with these frames. These frames cannot be
used with hats having a front area of 50 mm (2 inches) or
less, such as sun visors and children’s hats. In addition,
these cannot be used with hats that have a brim longer
than 80 mm (3-1/8 inches).
<Advanced type> 50 mm (H) × 130 mm (W)
(2 inches (H) × 5-1/8 inches (W))
Visit your
nearest
authorized
dealer.
Use when embroidering caps.
Baseball (golf) caps, tulip hats and bucket hats can be
embroidered with these frames. These frames cannot be
used with hats having a front area of 50 mm (2 inches) or
less, such as sun visors and children’s hats. In addition,
these cannot be used with hats that have a brim longer
than 80 mm (3-1/8 inches).
Cylinder frame (optional) 80 mm (H) × 90 mm (W)
(3 inches (H) × 3-1/2 inches (W))
Visit your
nearest
authorized
dealer.
Use when embroidering tubular and curved fabric, such as
shirt sleeves and trousers.
Embroidery type
Embroidering area
Reference
Usage
BBB
CCC