Filter
Top Products
SELECTING/EDITING/SAVING PATTERNS
—
——————————————————————————————————————————————————————
——
156
4
Select the pattern as described on page 141
to 151.
■ With patterns larger than 200 mm (H) × 300 mm
(W) (7-7/8 inches (H) × 11-3/4 inches (W))
When a pattern larger than 200 mm (H) × 300 mm
(W) (7-7/8 inches (H) × 11-3/4 inches (W)) is
selected, the following message appears.
Touch
to rotate the pattern 90 degrees
before opening it.
If the data is larger than 200 mm(H) × 300 mm(W)
(7-7/8 inches (H) × 11-3/4 inches (W)) even after it
is rotated 90 degrees, the following message
appears.
Touch to return to the pattern list screen.
Memo
● Perform the same operation when a
pattern larger than 200 mm(H) × 300
mm(W)
(7-7/8 inches (H) × 11-3/4 inches (W)) is
selected, whether from the computer or
USB media.
Computer (USB)
Using the included USB cable, the embroidery
machine can be connected to your computer, and
the embroidery patterns saved on the computer can
be temporarily recalled and used from the
machine.
Note
Check that the computer to be connected
meets the following operating conditions.
● Compatible models:
IBM-PC with a USB port as
standard equipment
IBM-PC-compatible computer
equipped with a USB port as
standard equipment
● Compatible operating systems:
Microsoft Windows Me/2000/XP,
Windows Vista, Windows 7,
Windows 8
■ Connecting
1
Plug the USB cable connector into the
corresponding USB ports for the computer
and for the machine.
1 USB port for computer
2 USB cable connector
• The USB cable can be plugged into the
USB ports on the computer and
embroidery machine whether or not they
are turned on.