Filter
Top Products
APPENDIX ——————————————————————————————————————————————————————————————————————————
——
264
The thread trimming button was
pressed while a screen other than
the embroidering screen or
embroidering settings screen was
displayed.
Display either the embroidering
screen or embroidering settings
screen before using the thread
trimming function.
The thread trimming button was
pressed before the machine was
unlocked.
Touch to use the thread
trimming function.
The machine needs maintenance.
(Refer to page 251.)
The machine is retrieving a
previously saved pattern.
The machine was stopped while
the needle bar case was moving.
Touch to automatically
reset the needle bar case.
The combined character pattern is
too large for the embroidery
frame.
Rotate the pattern 90 degrees and
then continue combining
characters.
The combined character pattern is
too large to fit in the extra-large
embroidery frame.
Change the character pattern
combination.
The motor has locked up due to
tangled thread or for other reasons
related to thread delivery.
If the thread is entangled in the
bobbin case, clean the race, and
then oil it. (Refer to page 247 and
251.)
The USB media is write-protected.
Cancel the write protection.