Editing the Embroidery Pattern (Pattern Editing Screen) 165
——
—————————————————————————————————————————————————————————————————————
—
—————————————
5
2
Touch the keys to adjust the pattern to the
desired size.
Each touch of a key slightly enlarges or
reduces the pattern.
The size of the pattern is displayed after a key
is touched to change it.
1 Vertical length
2 Horizontal width
• The size that the pattern can be enlarged
depending on the pattern or character.
• Depending on the pattern or character, if it
is rotated 90 degrees it may be enlarged
even more.
• If the pattern is rotated, the vertical and
horizontal directions may be reversed.
• To return the pattern to its original size,
touch .
3
If necessary, touch the arrow keys to adjust
the position of the pattern.
For more details, refer to page 163.
4
After making the desired changes, touch
.
X The pattern editing screen appears again.
CAUTION
Example: Original size
1 Reduces without changing the
height-to-width proportion.
2 Enlarges without changing the
height-to-width proportion.
3 Enlarges only in the vertical
direction.
4 Reduces only in the vertical
direction.
5 Enlarges only in the horizontal
direction.
6 Reduces only in the horizontal
direction.
7 Moves the pattern in the direction of the arrow
on the key.
8 Touch this key to return the pattern to its
original size.
9 Touch this key to close this screen.
2
1
3
4
5
6
7
8
9
● After changing the size of the pattern,
check the icons for the embroidery
frames that can be used and use only
the indicated frames. If a frame other
than those indicated are used, the
presser foot may hit the embroidery
frame and cause injuries.
1
2