Filter
Top Products
Saving Embroidery Patterns 189
——
—————————————————————————————————————————————————————————————————————
—
—————————————
5
USB media
When sending embroidery patterns from the
machine to USB media, plug the USB media into
the machine’s USB port.
Memo
● Some USB media may not be usable with
this machine. Please visit our web site for
more details.
● Depending on the type of USB media
being used, either directly plug the USB
device into the machine’s USB port or
plug the USB media Reader/Writer into the
machine’s USB port.
● The USB media can be inserted or
removed at any time.
1
Touch when the pattern you want to
save is in the embroidering settings screen.
2
Insert the USB media into the primary (top)
USB port on the machine.
1 Primary (top) USB port for media
2 USB media
• When connecting the USB Card Reader/
Writer to the machine’s USB port, be sure
to secure the cable with the two hooks on
the back panel. If the cable is not secured,
the embroidery frame may catch on the
cable while the frame is moving, causing
the pattern to become misaligned.
Note
● Safely place USB card reader/writer on the
card reader holder.
● The processing speed may vary by port
selection and quantity of data. The
primary (top) USB port processes the data
faster than the center port. It is
recommended to use the primary (top)
USB port.
● Two USB media cannot be used with this
machine at the same time. If two USB
media are inserted, only the USB media
inserted first is detected.
● Do not insert anything other than USB
media into the USB media port.
Otherwise, the USB media drive may be
damaged.