Filter
Top Products
Using the Settings Key 199
6
——
———————————————————————————————————————————————————————————————————
—
———————————————
Changing the background
colors of the embroidery
patterns or thumbnails
The background colors of the pattern display area
and pattern thumbnails. Depending on the pattern
color, select the desired background color from the
66 settings available. Different background colors
can be selected for the pattern display area and
pattern thumbnails.
When the embroidery machine is purchased, gray
color is selected.
The background color settings can be specified
from page 1/5 of the settings screen.
1
Touch .
2
Touch or
to select which of the pattern display area or
pattern thumbnails you want to change the
background color.
Select the background color from the 66
settings available.
1 Embroidery Background colors
2 Selected color
1 Thumbnail Background colors
2 Selected color
3 Touch to return to the settings screen.
Memo
● The setting remains selected even if the
machine is turned off.
Specifying jumpstitch
trimming / “DST” jump
codes for trimming
You can specify whether or not jumpstitches are
cut. In addition, when using Tajima embroidery
data (.dst), you can specify whether or not the
thread is cut according to the specified number of
jump codes.
ON: The machine cuts the upper and bobbin
thread before the jumpstitch. When Tajima
embroidery data (.dst) is used, the machine
converts the “jump” code to a trim code, based on
the number specified on the next line.
OFF: The machine does not cut either a jumpstitch
or the “jump” code in Tajima embroidery data
(.dst).
When the machine is purchased, “ON” is selected
and the number of jumps is set to “3”.
The “DST” thread trim settings can be specified
from page 2/5 of the settings screen.
Note
● If the setting is changed from the previous
setting, the new setting is only applied to
the next embroidery.
2
1
2
1
3