Brother 884-T09 Sewing Machine User Manual


 
Selecting an Embroidery Pattern 161
——
—————————————————————————————————————————————————————————————————————
—————————————
5
4
Select an embroidery pattern.
Touch the key for the desired pattern.
Touch to return to the original
screen.
X The selected pattern appears in the pattern
display area.
1 Shows the amount of memory used by selected
pattern.
2 Shows the amount of free space in the USB
media.
3 Touch this key to delete the selected pattern.
X If the wrong pattern was selected or you
wish to select a different pattern, touch the
key for the desired pattern.
Deleting embroidery data
From this screen, the embroidery data stored on
the USB media can be organized by deleting
unnecessary data.
After selecting the pattern that you wish to
delete, touch to display the screen
shown below.
1 Deletes the data, then returns to the screen with
no pattern selected.
2 Does not delete the data, then returns to the
screen before was touched.
Note
To delete the USB media pattern data,
delete it from the machine. This will delete
design data completely.
5
Touch .
This confirms the pattern selection.
X The pattern editing screen appears.
Note
Do not unplug the USB media or CD
while a pattern is being read or deleted,
otherwise the USB media may be
damaged or data may be lost.
In addition, do not unplug the USB media
or CD while the contents of the USB
media, or CD are displayed.
Do not unplug a USB device/media from
this machine immediately after it has been
plugged in. Be sure to wait at least 5
seconds before unplugging the USB
device/media.
3
1
2
1
2