Filter
Top Products
MIC612 Thermal Camera On-Screen Display (OSD) Menus (Bosch Protocol) | en 49
Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09
Input
Toggles through a list of valid inputs set in the Alarm I/O Setup > Inputs Setup Menu that
define the rule's inputs. A rule can have up to four (4) inputs.
Inputs which were set in the Inputs Setup Menu include Aux On/Off (1-99), Shot, and NONE
(default setting).
Output
Toggles through a list of valid outputs set in the Alarm I/O Setup > Outputs Setup Menu that
defines a rule's outputs.
Outputs set in the Outputs Setup Menu include Alarm Relay, Aux On/Off (1-99), Shot, OSD,
Transmit, and NONE (default setting).
Some outputs, such as Alarm Outputs 1-3, Alarm Relay, and Aux On/Off can be set to be
active for a specific duration of time as follows:
Seconds: 1-5, 10, 15, or 30
Minutes: 1-5 or 10
Latched: The alarm stays active until acknowledged.
Follows: The alarm follows the alarm rule.
Default setting: NONE
6.8 Language Menu
The Language Menu contains a list of languages in which the on-screen menus are available.
NOTICE!
You can include up to four (4) Input and Output events in a single rule. Each input and output,
however, must be true for the alarm's rule to be valid and enabled.
Language
Exit...
English
Spanish
French
German
Portuguese
Polish
Italian
Dutch
Russian
Czech
Focus / Iris: Save and Exit