Filter
Top Products
4 en | Table of Contents MIC612 Thermal Camera
F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc.
5.4 Setting the Addresses of the Two Cameras of the MIC612 33
5.4.1 Setting the Address of the Optical Camera via FastAddress 34
5.4.2 FastAddress, Bosch Protocol 34
5.4.3 FastAddress, Pelco Protocols 35
5.4.4 Active Commands in FastAddress 36
5.5 Setting Passwords 36
5.5.1 Special Passwords 36
5.5.2 Setting Passwords, Bosch Protocol 36
5.6 Configuring the Camera for Inverted Operation 36
6 On-Screen Display (OSD) Menus (Bosch Protocol) 37
6.1 Camera Setup Menu 38
6.2 Thermal Camera Setup Menu 40
6.3 Lens Setup Menu 41
6.4 PTZ Setup Menu 42
6.5 Display Setup Menu 43
6.6 Communication Setup Menu 45
6.7 Alarm Setup 46
6.8 Language Menu 49
6.9 Diagnostics Menu 50
7 On-Screen Display (OSD) Menus (Pelco Protocol) 53
7.1 Bosch Menu 54
7.2 Camera Setup 54
7.3 PTZ Setup 55
7.4 Other Menus 56
8 Operation of the Thermal Camera 57
8.1 Switching Video 57
8.2 Flat-Field Correction (FFC) 57
8.3 Displaying Thermal Camera Temperature 57
8.4 Triggering Alarms On Detection of Objects Outside of Set Thermal Temperature Threshold 58
9Common User Commands 59
9.1 Setting AutoPan Mode 59
9.2 Setting Preset Shots 59
9.3 Specifying a Shot or a Sector Title 59
9.4 Configuring Preposition Tours 60
9.5 Programming the Inactivity Operation 60
9.6 Recording Tours 61
9.7 Using the Wiper/Washer 61
10 Advanced Features 62
10.1 Alarm Rules 62
10.1.1 Controlling Alarm Rules 62
10.1.2 Alarm Rule Examples 62
10.2 Privacy Masking 63
10.3 Image Stabilization 64