Filter
Top Products
MIC612 Thermal Camera Table of Contents | en 3
Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09
Table of Contents
1Safety 6
1.1 About this Manual 6
1.2 Conventions in this Manual 6
1.3 Legal Information 6
1.4 Important Safety Instructions 6
1.5 EC Directives 8
1.6 Important Notices 8
1.7 FCC and ICES Compliance 10
1.8 Bosch Notices 11
1.9 Customer Support and Service 11
2 Unpacking 12
2.1 Parts List 12
2.2 Additional Products Required 12
2.3 Additional Tools Required 12
3 Installation Overview 13
3.1 Typical Mounting Arrangements 14
3.2 Mounting Positions 15
3.3 About the MIC Shielded Composite Cable 16
3.4 About Alarm Inputs and Outputs 16
4 Installation 17
4.1 Typical Installation Configurations 17
4.2 Overview of Installation Steps 18
4.3 Mounting the Camera 19
4.4 Installing the MIC Power Supply Unit (PSU) 20
4.4.1 Earth Link on PCB 21
4.4.2 Fuse Ratings 21
4.4.3 Layout of MIC Power Supply Units (PSUs) for MIC612 22
4.4.4 Installation Instructions 23
4.4.5 Commissioning the Camera with Heater Option Fitted 28
4.5 Fitting the Optional Sunshield (MIC612) 29
5 Getting Started 30
5.1 Establishing Control of the Camera 30
5.1.1 Establishing Control of the Camera via Biphase Protocol 30
5.1.2 Establishing Control of the Camera via RS-485 Protocol 30
5.2 Powering On 31
5.3 Controlling the Camera 31
5.3.1 Basic Keyboard Operation 31
5.3.2 Navigating the On-Screen Display (OSD) Menus 32
5.3.3 Keyboard Commands, Bosch Protocol 32
5.3.4 Keyboard Commands, Pelco Protocol 32
5.3.5 Special Preset Commands, Pelco Protocol 33