Filter
Top Products
12 en | Unpacking MIC612 Thermal Camera
F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc.
2 Unpacking
– This equipment, although ruggedized, should be unpacked and handled with care. Check
the exterior of the packaging for visible damage. If an item appears to have been
damaged in shipment, notify the shipper immediately.
– Verify that all the parts listed in the Parts List below are included. If any items are
missing, notify your Bosch Security Systems Sales or Customer Service Representative.
– Do not use this product if any component appears to be damaged. Please contact Bosch
Security Systems in the event of damaged goods.
– The original packing carton is the safest container in which to transport the unit and must
be used if returning the unit for service. Save it for possible future use.
2.1 Parts List
The package containing the MIC Series 612 camera should include the following items:
2.2 Additional Products Required
The following table lists additional products, sold separately by Bosch or other
manufacturers, required to operate MIC Series 612 cameras:
2.3 Additional Tools Required
The following table lists additional tools required (not supplied by Bosch):
CAUTION!
Take extra care lifting or moving MIC612 cameras because of their weight (10.66 kg / 23.5 lb).
Quantity Part
1 MIC Series 612 Thermal Camera
1 MIC Series 612 Installation Manual (this booklet)
4 M8 stainless screws and washers
1 Nebar gasket
Quantity Product Part Number Size
1 per MIC612 Shielded Composite Cable for MIC thermal cameras
(See the model numbers and lengths at right.)
MIC-THERCBL-2M 2 m
MIC-THERCBL-10M 10 m
MIC-THERCBL-20M 20 m
MIC-THERCBL-25M 25 m
1 per MIC612 Power Supply Unit (PSU) for thermal cameras MIC-240PSU-2,
MIC-115PSU-2,
MIC-24PSU-2
-- Mounting accessories
Quantity Part
1 13 mm wrench for the PCD foot, fixing bolts
1 3 mm screwdriver for the terminal blocks in the MIC PSU
1 8 mm screwdriver for captive screws for MIC PSU enclosure
1 Silicone sealant for ensuring a water tight seal [if not using the Nebar gasket]