Filter
Top Products
46 Instruction 3015-4275
If the current Zone Screen appears normal, scroll through the displays using the NEXT/BACK keys or the
UP/DOWN cursor keys until you locate the affected zone. You can further investigate the status of the affected
zone by pressing the adjacent key and going to the Zone Setup #1 Screen (Page
41). You may also press the
ALARM key to go directly to the Alarm Summary Screen (Page
50). See Working with Alarms on Page 50 to
learn more about responding to alarms.
Fault Conditions
If a system malfunction occurs, the yellow FAULT LED will glow. Additionally, an external alarm device may
activate and an audible alarm may sound if those features have been enabled (Pages
28 & 35).
From the top level Zone Screen (Page
44), press the SYSTEM key to go to the System Screen (Page 31) and
then press the FAULT key to go to the Fault Screen (Page
54). See Working with System Faults on Page 54 to
learn more about responding to system faults.