Filter
Top Products
Instruction 3015-4275 33
ADM800 - Setup Programming
Setting the Clock
From the top level System Screen press the key adjacent to the date/time field to go to the Clock Setup
Screen.
Clock Setup Screen
Use the LEFT/RIGHT cursor keys to move the cursor across the field to the value you wish to edit. Use the
UP/DOWN cursor keys to modify the field value and press the ENTER key to accept your entries. When you are
through editing the date/time value, do one of the following:
• Press the SET AGM CLOCKS key to synchronize all AGM300 monitors to the current date/time setting.
• Press the QUIT key to reject all edits and revert to the previous setting.
• Press the SET ADM CLOCK key to accept the current date/time setting.