Filter
Top Products
q
Operating
Instructions
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
1. Set the Fan Control to the desired setting (Figure 1).
You can use either the ENERGY SAVER or NORMAL
FAN settings. (See “Using the ENERGY SAVER
settings” on page 10.)
QUICK COMFORT
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . for fastest cooling
MED . . . . . . . . . . . . . ,.,.,,.,.,............................ for normal cooling
LOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . for sleeping comfort
FAN ONLY . . . . . . . . . . . . . . . . . . . for circulating air without cooling
NOTE: Set the Exhaust Vent Control to CLOSED for
maximum cooling.
2. Turn the Thermostat to a mid-setting (Figure 2).
For maximum cooling, turn the Thermostat clockwise.
For less cooling, turn the Thermostat counterclockwise.
Experiment and find the setting that suits you best.
NOTES:
l
if you turn the air conditioner off, wait at least
3 minutes before turning it back on. This prevents
the air conditioner from blowing a fuse or tripping
a circuit breaker.
l
Do not try to operate your air conditioner when
the outside temperature is below 65°F (18°C). The
inside evaporator coil may freeze up and the air
conditioner may not operate properly.