High-Wall Type
Owner’s Manual
–30–
Toshiba
EN
9 TEMPORARY OPERATION
TEMPORARY operation
This function is used to operate the unit temporarily in case you misplace the wireless remote control or its
batteries are exhausted.
• Push the button once (less than 3 seconds) to start the air conditioner.
• The last operation conducted with the wireless remote control will be performed. (When wireless remote
control is not used, models with the auto-changeover (cooling/heating) function perform “A” operation,
and those without the function perform cooling operation (set temperature: 75 °F (24 °C), fan: HIGH).)
CAUTION
Continuous pressing of the button for 10 seconds and above will start the forced cooling operation.
(This will impose burden on the air conditioner. Do not perform this for the purposes other than test run.)
In this time all indicators of indoor unit illuminate.
I cannot find the
remote control
A temporary
operation feature
is provided!
30-EN
+001111052101_00Ta.book Page 30 Friday, November 20, 2009 1:13 PM