Filter
Top Products
High-Wall Type
Owner’s Manual
–19–
Toshiba
CAUTION
The COMFORT SLEEP mode is not enabled in
the DRY or FAN ONLY operation.
NOTE
• For the cooling operation, the set temperature
will automatically increase 1 degree/hour for
2 hours (maximum 2 degrees increase).
For the heating operation, the set temperature
will decrease.
• During group control operation, the set
temperature and the fan speed are not
automatically adjusted. Only off timer function is
activated.
Sleep timer operation
To start the sleep timer (OFF timer) operation
1 Press the SLEEP button.
Select 1, 3, 5 or 9 hours for the OFF timer operation.
Adjusting airflow direction
• Adjust the airflow direction properly. Otherwise, it
might cause discomfort and make the room
temperature uneven.
• Adjust the vertical airflow using the remote
control.
• Adjust the horizontal airflow manually.
Adjust the vertical airflow
The air conditioner automatically adjusts the
vertical airflow direction in accordance with the
operating conditions when AUTO or A mode is
selected.
To set the airflow direction you desire
Perform this function when the air conditioner is in
operation.
1 FIX button
Keep pressing or pressing briefly the FIX button on
the remote control to move the louver in the desired
direction.
• In subsequent operations, the vertical airflow is
automatically set in the direction to which you
adjusted the louver using the FIX button.
NOTE
Operating angle of vertical airflow louver will be
different during cooling, dry and heating operation.
CLR
SLEEP
SET
TEMP
1
TEMP
1
19-EN
+001111052101_00Ta.book Page 19 Friday, November 20, 2009 1:13 PM