Filter
Top Products
High-Wall Type
Owner’s Manual
–28–
Toshiba
EN
Unit select
• When multiple indoor units are controlled with
one wired remote control, louver position can be
set for all indoor units or each indoor unit
individually.
• To set louver direction for a particular unit, push
button to display an indoor unit number
in the control group. Then set the louver direction
of the displayed indoor unit by following the steps
outlined above.
• When no indoor unit number is displayed, all
indoor units in the control group can be
controlled simultaneously.
• Each time you push (left side of the
button), the display changes as follows:
Not
display
UNIT No.
1-1
UNIT No.
1-2
UNIT No.
1-3
UNIT No.
1-4
28-EN
+001111052101_00Ta.book Page 28 Friday, November 20, 2009 1:13 PM